Ozone Test Chamber for Rubber Performance Evaluation

0
52
Ozone Test Chamber for Rubber Performance Evaluation

In different industries, rubber materials play a vital role. So, durability and resistance to environmental factors are necessary for rubber products. One environmental factor that degrades rubber is ozone which can lead to cracks, and brittleness of rubber and as a result, the rubber products can deteriorate over time. To prevent this damage, manufacturers go through the rubber products with a test which is commonly named as ozone test chamber. It is a standard procedure which helps in evaluating the durability and quality of rubber products. In this blog, we’ll share some information on the procedure of ozone test for rubber and its importance. So, let’s start.

Ozone Test for Rubber Procedure

Rubber and other materials are exposed to ozone exposure faster in a specialised environmental equipment called an ozone aging test chamber. The Rubber may eventually deteriorate due to ozone, a highly reactive chemical in the Earth’s atmosphere, which can cause chipping, fading, and other problems. Rubber sample resistance to ozone may be evaluated by manufacturers in a test chamber by exposing samples to varying temperatures and ozone concentrations. This allows manufacturers to improve the material’s durability. This test is based on a standardized procedure. It may vary differently according to different industries and products. But the general steps in conducting an ozone test for rubber are:

  • Prepare the sample of rubber such as discs, and strips. The samples should be in a uniform state.
  • Place the rubber sample into the ozone test chamber which allows for controlled ozone exposure. Seal the chamber.
  • Introduce the ozone gas into the test chamber at a specific temperature and concentration.
  • However, the duration may vary according to the product to be tested. Generally, it remains for some days to weeks.
  • After the set time, open the ozone chamber, remove the rubber sample and inspect it. Check for the signs of degradation.
  • Analyze the test results for determining the resistance of material to ozone degradation.

Importance of Ozone Test for Rubber

The ozone test has significant importance. It is vital for several reasons such as.

  • Assurance of quality: It can assure the quality of the products which helps the manufacturers and researchers in many ways.
  • Evaluation of performance: Rubber products are used widely in different materials, so it’s important to evaluate their performance under different conditions. However, the ozone test evaluates the performance of rubber materials.
  • Cost savings: This test is also cost-saving.

Specifications of Ozone Test Chamber:

Model SM-150CY
Temperature range 25℃~60℃
Ozone concentration 50~1000pphm or100~300ppm
Temperature fluctuation ±0.5℃
Ozone control precision ±10%
Sample frame speed 360 Rotate the sample frame (Rev. 1 RPM)
Controller Color LCD touchscreen controller
Time Unit H.M.S.selectable up to 9999h
Ozone concentration analysis Inlet concentration analysis regulator, 4 ~ 20mA output
Ozone generator high voltage silent discharge point tube
Acquisition system imports of South Korean imports of programmable controllers, measuring module
Heating system completely independent systems, nickel-chromium alloy electric heating water heater
Ozone concentration the British ozone concentration sensor with a standard signal output and sampling
Ozone generator silent discharge type ozone generator has low noise and high purity

Features of Ozone Test Chamber: 

1. Air circulation device: built-circulation duct, test gas flow evenly from top to bottom parallel to the specimen surface, in line with the national standard. 2. The use of an integrated ozone concentration temperature controller (setting mode for the touch of a button type), high integration, good reliability, LED display, display resolution temperature (0.1 °C), humidity (0.1% RH), ozone concentration (1pphm), PID setpoint control, easy to operate. 3. Electromagnetic air pump to provide quality air, oil-free dry gas system to ensure the reliability of long-term work.

Environmental Ozone Test Chamber Uses:

An ozone chamber is a controlled environment used to test the effects of ozone on various materials, products, or components. These chambers are designed to simulate ozone exposure under specific conditions such as temperature, humidity, and ozone concentration. They are commonly used in industries such as automotive, aerospace, and electronics to assess the durability and performance of materials and products when exposed to ozone.

In addition to assessing the effects of ozone on materials and products, Effective Lab India ozone test chambers are also used for research purposes to study ozone’s impact on different substances. These chambers are often equipped with sensors and monitoring equipment to measure ozone concentration, temperature, humidity, and other relevant factors during testing. These chambers are utilized to test the effectiveness of ozone in disinfecting medical equipment and sterilizing pharmaceutical products. Ozone’s strong oxidizing properties make it an effective disinfectant, and these chambers help ensure that the ozone treatment process is both safe and efficient for medical use.

In conclusion, we will say that the ozone test is essential for determining the performance of rubber materials. It helps manufacturers and researchers determine the resistance of rubber products in the ozone environment and whether the products can resist ozone effects or not. In this test, the rubber samples are subjected to a controlled ozone environment and based on the results, manufacturers can make decisions about the selection and design of materials. However, in different industries, ozone test plays a vital role in determining the longevity and effectiveness of rubber components.

Leave a reply